If you continue to have problems with a SAS Autoloader, check the following: Ensure that the device is compatible with the SAS host adapter and backup application you plan to use. Windows To improve backup performance and improve SAN stability, shutdown and disable the Windows Removable Storage Manager unless the backup software requires it: From the Windows start menu, select Control Panel. The text after the error sub-code (Robotic: connection to slave robotic failed in this example) is name of the component followed by the text description of the error sub-code. Generated Tue, 18 Oct 2016 18:21:18 GMT by s_ac4 (squid/3.5.20) ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.10/ Connection
The main error code (0x83) is displayed in parenthesis as the Global error code. The device uses two Logical Unit Numbers (LUNs) to control the tape drive (LUN 0) and robotic (LUN 1). The wellness test exercises all robotic movements and checks the status of the electrical components and communication. Check cleaning tape and exchange if necessary. https://vox.veritas.com/t5/Backup-Exec/Library-error-problem-positioning-a-transport/td-p/11533
If not, only the tape drive will be detected. Please try the request again. The bus would be saturated with 2:1 compressible data. You might not be able to backup a subset of files or restore a single file.
SCSI Host Adapter Installation: Verify that the SCSI host adapter is installed correctly. This is most likely caused by a dirty drive that cannot read a tape and marks the tape invalid. Make sure the cleaning cartridge has not expired. Msl4048 Error Codes Why do people move their cameras in a square motion?
Join them; it only takes a minute: Sign up Error using ksoap up vote 0 down vote favorite I have implemented many SOAP functions for my app, but now I have He: Slider Outside Range, Error During First Slider Movement Code: 94 61 Any cartridge that is suspected of being defective or contaminated should NOT be reused in any drive. The code after LIB/ERR (80 in the example) will be 80 or 40. 80 indicates a hard error, 40 indicates a soft error. Small file size can impact performance.
Clean the tape drive. Drive has rejected the cartridge as invalid. He Elevator Blocked Error During Move Elevator To Scan Position Code 8b 26 The disadvantage is that backup and restore operations work on an entire disk, partition, or LUN. He Sled Position Not Found Code 9b 37 View the inventory with the RMI.
top top Error sub-code descriptions Robotic error sub-codes The following table lists the robotic error sub-codes. Reboot the host server. Media that is moved from one environment to another can cause issues until it has acclimated to the new conditions. Use the correct type of cartridges for the operation. He: Slider Blocked, Error During Second Slider Movement Code: 8a 63
Only the devices physically located at the beginning and end of the SCSI bus should be terminated. Please try the request again. The available logs are: Error Trace, Informational Trace, Warning Trace, Configuration Change Trace, and Standard Trace. top Disk image, flash, or sequential Performance impact: GOOD.
The text description in the header (“robotic controller error” in this example) is the simple text description of the main error code. Ibm Ts3100 Tape Library Error Codes Contact a service representative. Slider: The part of the robotics assembly that plunges in and out for get and put operations.
For example: 8D 52 Mechanical Block The error log contains a list of all errors, with a separate row for each error. When fully used and assuming that the connection to the disks does not force the speed to a lower parallel SCSI type, an Ultra 160 connection can provide enough bandwidth for Replace the power cord. Hp Tape Library Error Codes Unless otherwise noted in the troubleshooting document, try to resolve the error by cycling power to the library and retrying the last operation.
Expired cleaning cartridge A cleaning cartridge is good for 50 cleans. We suggest you to refer to the following steps to resolve this issue: - Backup Exec work best if the target IDs for each device are configured in a specific manner Find the performance impact of your system's disk connection in Performance impact of various disk connections. Stop as many programs as possible while a backup or restore is in progress.
Before installing a driver, make sure it is not in conflict with the application software. Performance impact of various file sizes Average file size Performance impact Recommendations <64 kb: small files POOR. Native backup applications based on tar, cpio, NT Backup, etc. If you are backing up data over a network, consider comparing the performance to a local-only backup.
Attention LED Issues Problem Solution Both the Attention and Cleaning LEDs are lit. top Performance problems NOTE: For more performance troubleshooting information, see the Performance Troubleshooting Guide at www.hp.com/support/pat . Make sure the backup server has enough memory to handle the bandwidth of the backup or restore. Many backup applications do not read or write to cartridges that were created using a different backup application.
When fully used, a 1 GB fibre connection can provide enough bandwidth for two LTO-2 tape drives. Verify that the power supply is inserted correctly and that the thumbscrews are adjusted. For example: 24/06/05 01:48 D7 50 System Error where: 24/06/05 = date in the format DD-MM-YY 01:48 = hours in 24h clock format. Verify that the cartridge is not a firmware upgrade tape.
When fully used, a 2 GB fibre connection can provide enough bandwidth for an LTO-3 tape drive. The system returned: (22) Invalid argument The remote host or network may be down. If the file system has a lot of fragmentation, use a de-fragmentation utility to make the files contiguous again. NOTE: The support ticket downloaded from the RMI will only contain information about the Autoloader.
If possible, do NOT use a file-by-file backup method. Ethernet: 100 Base T, 10 Base T POOR. 100 Base T and 10 Base T Ethernet do not have enough bandwidth to support any of the drives and would require too Make sure you are using an Ultrium universal cleaning cartridge (see the Tape cartridges section in Tape Cartridges and Magazines ). Server or workstation with a single disk (spindle) POOR.